# All-purpose acknowledgement

**URL:** <https://forum.notarycafe.com/t/all-purpose-acknowledgement/41620>\
**Category:** Law Related\
**Created:** [August 19, 2023, 12:52pm UTC](https://forum.notarycafe.com/t/all-purpose-acknowledgement/41620 "2023-08-19T12:52:54Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![kurtgeisen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forum.notarycafe.com/kurtgeisen/32/27541_2.png) [@kurtgeisen](https://forum.notarycafe.com/u/kurtgeisen)\
**Post date:** [August 19, 2023, 12:52pm UTC](https://forum.notarycafe.com/t/all-purpose-acknowledgement/41620/1 "2023-08-19T12:52:54Z")

</div>

New to the job and we almost got pulled into a bad situation. Our signing service told us to stamp an “All-Purpose Acknowledgment”. We asked them to check and make sure it was OK and they came back after talking to the “Loan Officer” that it was OK, just stamp and sign and leave the bottom part blank. We called NNA hot line and it is ILLEGAL! We are pretty sure it is a nation-wide law not to sign “blank”/extra certificates so it really surprised us when our service told us to do it.

---

<div class="post-metadata">

**Author:** ![cNsa5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forum.notarycafe.com/cnsa5/32/33381_2.png) [@cNsa5](https://forum.notarycafe.com/u/cNsa5)\
**Post date:** [August 19, 2023, 2:03pm UTC](https://forum.notarycafe.com/t/all-purpose-acknowledgement/41620/2 "2023-08-19T14:03:42Z")

</div>

@kurtgeisen Thank You for sharing your **direct** (_learning_) **experience** with the signing service [SS].

======

There are multiple posts & threads across the **Notary Cafe** forum from us sages as well as other widely experienced members who **strongly advocate** for garnering as much training/certification as you need **to feel confident** as a _business owner_ to manage your _newly launched business_.

Dorothy is no longer in Kansas as some might say . . .

Here are a few threads/posts that you may find insightful/helpful:

> [@I found a list of MISMO approved RON, RIN, and IPEN providers for emortgage closing!](http://forum.notarycafe.com/t/i-found-a-list-of-mismo-approved-ron-rin-and-ipen-providers-for-emortgage-closing/31340/10):
>
> Yes, @LindaH-FL Thank You! After all, they’re Business Owners (like each of us). The onus is upon them to seek development, growth, increasing knowledge, skills, & abilities to best prepare themselves for their own evolving success.

> [@I found a list of MISMO approved RON, RIN, and IPEN providers for emortgage closing!](http://forum.notarycafe.com/t/i-found-a-list-of-mismo-approved-ron-rin-and-ipen-providers-for-emortgage-closing/31340/20):
>
> @trustedsigning Hmmm . . . As new members seek insights regarding launching their business, a Key Element to Success is providing themselves with an appropriate foundation and undergirding that will serve & support their business. ====== Over the years of having successfully completed nearly all the available training programs, I only recommend the very Best (see below). This training amounts to a few hundred dollars. Due to the very reasonable price, the training investment can be quickly …

> [@Signing S.Show](http://forum.notarycafe.com/t/signing-s-show/25101/2):
>
> Hi Ally, Certainly, I can easily feel your frustration. I’d like to begin by offering a simple comparison: There is a very large difference between being an employee and becoming a business owner. As a business owner, from the onset, you’re going to be pretty much flying solo; that is, unless you have a family member that is within this business sector. There are no Manuals of Desk Instructions [MDIs] as one may find as an employee nor any more experienced fellow employees there to train you…

The business owner mentality is nearly completely **diametrically opposed** to that of an ‘employee’ mentality.

I’ll leave it at: _ **Caveat Emptor** _

🦢

---

<div class="post-metadata">

**Author:** ![RiverpointeTax](https://yyz2.discourse-cdn.com/flex034/user_avatar/forum.notarycafe.com/riverpointetax/32/33704_2.png) [@RiverpointeTax](https://forum.notarycafe.com/u/RiverpointeTax)\
**Post date:** [August 21, 2023, 10:20pm UTC](https://forum.notarycafe.com/t/all-purpose-acknowledgement/41620/3 "2023-08-21T22:20:24Z")

</div>

A blank All-Purpose acknowledgement can be attached to any document. These can be attached to any document, including one’s you didn’t notarize. This can put you in serious legal trouble. **DO NOT NOTARIZE ANY BLANK OR GENERAL PURPOSE ANYTHING UNDER ANY CIRCUMSTANCES.**

My apologies for the loud response. This is something that needs to be heard by everyone, especially the newbies.

---

<div class="post-metadata">

**Author:** ![moksnotaryservice](https://yyz2.discourse-cdn.com/flex034/user_avatar/forum.notarycafe.com/moksnotaryservice/32/35755_2.png) [@moksnotaryservice](https://forum.notarycafe.com/u/moksnotaryservice)\
**Post date:** [August 22, 2023, 1:49am UTC](https://forum.notarycafe.com/t/all-purpose-acknowledgement/41620/4 "2023-08-22T01:49:31Z")

</div>

I’ve seen this on several appointments. I keep them just in case and either fill them out if needed. I always add page counts (1 of 2, 2 of 2)

---

<div class="post-metadata">

**Author:** ![ewing\_joe](https://yyz2.discourse-cdn.com/flex034/user_avatar/forum.notarycafe.com/ewing_joe/32/33581_2.png) [@ewing\_joe](https://forum.notarycafe.com/u/ewing_joe)\
**Post date:** [October 3, 2023, 2:40am UTC](https://forum.notarycafe.com/t/all-purpose-acknowledgement/41620/5 "2023-10-03T02:40:53Z")

</div>

New to the job, was this your first assignment?

Were you required to scan ths copies back to the signing service before shipping them?

What’s the name of the signing company that made the request?

Its not illegal for them to ask, but it’s on you if you comply.

---

<div class="post-metadata">

**Author:** ![NC\_Mike](https://yyz2.discourse-cdn.com/flex034/user_avatar/forum.notarycafe.com/nc_mike/32/54_2.png) [@NC\_Mike](https://forum.notarycafe.com/u/NC_Mike)\
**Post date:** [March 6, 2024, 4:55pm UTC](https://forum.notarycafe.com/t/all-purpose-acknowledgement/41620/6 "2024-03-06T16:55:50Z")

</div>

Closed on March 6, 2024, 4:55pm UTC

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.
